greatness of aluminum brakes!
- HotRod58er
- Junior Member
- Posts: 31
- Joined: Sun Apr 20, 2008 3:06 am
greatness of aluminum brakes!
I have heard about people retrofitting their Buicks to fit aluminum drums on the back as well as front end. My 59's brakes are as good as disc brakes and it has manual braking and fully rebuilt brakes. If mine had retrofitted aluminum brakes on the rear end I would like to have a braking competition with a antilock disc brakes system on the same kind of car! How do YOU think your Buicks brakes compair to similar brakes of the time and to modern anti lock?
Reverance for the past-ensures the future
Cars
1997 Buick Riviera (yes its supercharged)
1959 Buick LeSabre 4 door sedan (45,000 original miles)
Cars
1997 Buick Riviera (yes its supercharged)
1959 Buick LeSabre 4 door sedan (45,000 original miles)
Re: greatness of aluminum brakes!
My modern antilock stops better, but the car weighs a lot less than the Buick. I think the Buick stops fine, though.
The best braking cars I have are my two late 70s Lincolns. Instead of vacuum assist, they have hydraulic assist from the power steering pump - they stop better than my modern antilock car, and they are about 500 pounds heavier than the '58 Buick. Only problem: If I'm making a very sharp turn and I turn the steering wheel to its farthest limit - the brakes begin to engage.
The finned aluminum brake drums on '57-'60 Buicks are mainly for cooling purposes to maintain good braking performance. Most of the stopping power is in the front brakes, not the rear, so more heat is going to build up in front. Therefore I see little advantage to retrofitting the rear brakes with the aluminum drums.
The best braking cars I have are my two late 70s Lincolns. Instead of vacuum assist, they have hydraulic assist from the power steering pump - they stop better than my modern antilock car, and they are about 500 pounds heavier than the '58 Buick. Only problem: If I'm making a very sharp turn and I turn the steering wheel to its farthest limit - the brakes begin to engage.
The finned aluminum brake drums on '57-'60 Buicks are mainly for cooling purposes to maintain good braking performance. Most of the stopping power is in the front brakes, not the rear, so more heat is going to build up in front. Therefore I see little advantage to retrofitting the rear brakes with the aluminum drums.
1958 Buick Limited Riviera Coupe Model 755
Other cars:
1953 Chevrolet 3100 Pickup
1957 Pontiac Transcontinental Safari
1968 Ford Galaxie 500 HT
1977 Lincoln Continental Convertible
Other cars:
1953 Chevrolet 3100 Pickup
1957 Pontiac Transcontinental Safari
1968 Ford Galaxie 500 HT
1977 Lincoln Continental Convertible